High Speed Laser cutting and Engraving Machine (3D scan head system)

ERINA 100

Features

Principle of dynamic focusing system is to daynamically control the laser beam divergence angle by a group of optical beam expander lens, so as to make the focusing laser spot on the different position of marking area or curved surface coordinate uniform. Usually in the design, optical lens group consists of 3 pieces of focusing lens. Back focus lens is consist of two pcs of aspherical lenses, which can eliminate spherical aberration, and can obtain better beam quality; the front negative focusing lens is controlled by software, driven by the high speed rod motor, do the reciprocating motion, compensating the corresponding laser spots on the marking platform point by point.

With high speed digital galvo, combined with dynamic shaft drive, can realize the large area work size marking and 3d surface marking.

Optimization of optical design and optical lens combination, reduces optical loss and component costs, as well as improves laser use efficiency.

Technical Specification

Model	ERINA 100	ERINA 150	ERINA 250	ERINA 350
Laser Power	100W	150W	250W	350W
Laser wavelength	Co2 RF Laser Metal Tube 10.6 um
Working area	400 x 400 mm to 600 x 600 mm		400 x 400 mm to 1200 x 1200 mm
Scan Head	3D Dynamic Galvo System
Cooling Method	Water Cooled
Max. Speed	Max. 8000 mm/s
Min. Latter Size	1 mm
Repetition Accuracy	0.01mm
Graphical Format	PLT, DXF, BMP, JPG, TIF
Power Supply	PLT, DXF, BMP, JPG, TIF
Power Supply	220V / 415V 50Hz / 60Hz
Operating System	Win 7 / 10 (32bit / 64bit)
Working Environment	15°C – 30°C, Humidity 30%-80%
Consumption	≤3KW	≤5KW	≤7KW	≤9KW
*Specification are liable to change without prior notice.